Issues

• Store the components' mount positions in EEPROM

  rLoopTeam/eng-software-pod#258 · Filter by author dean9 opened on Dec 14, 2016 · CTRL-65 FLIGHT CONTROL / PITCH / YAW

• May need some filtering or FFT to detect yaw or pitch oscillations

  ready
  rLoopTeam/eng-software-pod#151 · Filter by author omegabytes opened on Oct 29, 2016 · CTRL-65 FLIGHT CONTROL / PITCH / YAW
  

• Check for sensor range limits, etc. report any faults

  in progress
  rLoopTeam/eng-software-pod#148 · Filter by author omegabytes opened on Oct 29, 2016 · CTRL-65 FLIGHT CONTROL / PITCH / YAW
  2

  

• Make sure GS can control and interract with each ASI, save settings, read RPM and thermal, etc.

  clarification needed
  rLoopTeam/eng-software-pod#135 · Filter by author omegabytes opened on Oct 28, 2016 · CTRL-62 FLIGHT CONTROL / ASI INTERFACE

• Provide a distance calculation

  clarification needed
  rLoopTeam/eng-software-pod#123 · Filter by author omegabytes opened on Oct 28, 2016

• Interface with pusher interlock

  clarification needed
  rLoopTeam/eng-software-pod#116 · Filter by author omegabytes opened on Oct 28, 2016 · CTRL-58 FLIGHT CONTROL / BRAKES
  

• Ensure that any position error is handled correctly

  clarification needed
  rLoopTeam/eng-software-pod#114 · Filter by author omegabytes opened on Oct 28, 2016 · CTRL-58 FLIGHT CONTROL / BRAKES
  

• Monitor and log bus performance, error rates, etc from the test system.

  clarification needed
  rLoopTeam/eng-software-pod#100 · Filter by author omegabytes opened on Oct 28, 2016 · CTRL-57 SC16IS741 (SPI to UART Driver)

• Create a bench test system to simulate the input's from all the lasers

  clarification needed
  rLoopTeam/eng-software-pod#99 · Filter by author omegabytes opened on Oct 28, 2016 · CTRL-57 SC16IS741 (SPI to UART Driver)

• Provide functions to start charge, stop charge, monitor charge volts and current

  clarification neededfeature
  rLoopTeam/eng-software-pod#90 · Filter by author omegabytes opened on Oct 26, 2016 · CTRL-56 LCCM653__RLOOP__POWER_CORE / CHARGER
  

• Ensure the temp data, ROMID, manual search start, individual sensor scan, etc is selectable and manually usable from ground station

  clarification needed
  rLoopTeam/eng-software-pod#57 · Filter by author omegabytes opened on Oct 26, 2016 · CTRL-47 DS18B20 (1-Wire temp sensors needed for batt and BCM discharge temp)

• Check and verify the results of requesting from a device that does not have a ROMID on the bus

  clarification neededtest
  rLoopTeam/eng-software-pod#55 · Filter by author omegabytes opened on Oct 26, 2016 · CTRL-47 DS18B20 (1-Wire temp sensors needed for batt and BCM discharge temp)
  1

• Verify the ROMIDs against the actual hardware in the state machine

  clarification needed
  rLoopTeam/eng-software-pod#49 · Filter by author omegabytes opened on Oct 26, 2016 · CTRL-47 DS18B20 (1-Wire temp sensors needed for batt and BCM discharge temp)

• Allow the ROMID's to be stored in EEPROM

  clarification needed
  rLoopTeam/eng-software-pod#47 · Filter by author omegabytes opened on Oct 26, 2016 · CTRL-47 DS18B20 (1-Wire temp sensors needed for batt and BCM discharge temp)
  1

  

• On actual hardware catalog all 540 sensors

  clarification needed
  rLoopTeam/eng-software-pod#45 · Filter by author omegabytes opened on Oct 26, 2016 · CTRL-47 DS18B20 (1-Wire temp sensors needed for batt and BCM discharge temp)

• Create a function to search the ROMID of a single device and ensure it can be logged to terminal

  clarification neededfeature
  rLoopTeam/eng-software-pod#44 · Filter by author omegabytes opened on Oct 26, 2016 · CTRL-47 DS18B20 (1-Wire temp sensors needed for batt and BCM discharge temp)
  1

  

• EXAMPLE URL-based Status Indicator Plugin

  EXAMPLEfeatureinvalidtrivialwontfix
  rLoopTeam/eng-software-pod#32 · Filter by author omegabytes opened on Oct 25, 2016
  1